Find Your PSS Shaft Seal:
PSS Shaft Seal Selector
PSS O-Ring Kit

PSS O-Ring Kits


Shop Now

If the PSS Shaft Seal's Rotor is removed and re-installed, PSS Seal suggests that you replace the O-rings within the rotor. If the Rotor's set screws are ever removed, they should also be replaced as they are designed for one-time use. This is a replacement kit for the o-rings and set screws.

Includes

Here's what comes included with all PSS O-Ring Kits.

  • Set screws - 5qty
  • O-rings - 2qty
  • Allen wrench
  • Thread lock
  • Clamp Jackets - 4qty

Important Note

Be sure never to use the same set screw on the shaft twice. There are two set screws in each of the two holes in the stainless steel rotor. One is tightened onto the shaft, and the other is tightened onto the first lock in place against the shaft. The set screws are made with a cup at the base that compresses into the shaft, ensuring a secure grip.

New versus used set screws

Newsletter Signup

* indicates required

Follow Us

© PSS Seal, LLC. All Rights Reserved. PSS Seal and AESSEAL logos